0901.668.234 Chi nhánh Tra cứu đơn hàngVI
Giai Phap Do Kiem
Hỗ trợ kỹ thuậtBáo giá
Danh mục sản phẩm
Máy dò kim loại cầm tayCảm biến đo nhiệt độ kiểu KHand toolsTúi, tủ đựng đồ nghềTúi đựng đồ nghềTuốc nơ vít, tua vít, tô vítBộ tua vít (set)Tua vít ba ke (4 cạnh)Tua vít dẹpCác loại tua vít khácKìmKìm tổ hợp, kìm răng, kìm điện
Liên hệ
Máy dò kim loại cầm tayCảm biến đo nhiệt độ kiểu KHand toolsTúi, tủ đựng đồ nghềTúi đựng đồ nghềTuốc nơ vít, tua vít, tô vítBộ tua vít (set)Tua vít ba ke (4 cạnh)

Thiết bị đo lường chính hãng

Sản phẩm đo kiểm

Thiết bị đo kiểm, máy đo lường và nhóm sản phẩm kỹ thuật.

22sản phẩm phù hợp
Thông số biến thể

Danh mục này chưa có thông số biến thể trong Odoo.

ABBFLUKEHIOKIKYORITSU
HIOKI DT4261 DIGITAL MULTIMETER

HIOKI

HIOKI DT4261 DIGITAL MULTIMETER

Mã: 243819316419

  • DC Voltage range : 600.0 mV to 1000 V, 5 ranges, Basic accuracy: ±0.15% rdg. ±2 dgt.
  • AC Voltage range : 6.000 V to 1000 V, 4 ranges, Frequency characteristics: 40 Hz to 1 kHz Basic accuracy 40 Hz - 500 Hz: ±0.9% rdg. ±3 dgt. (True RMS, crest factor 3 or less)
  • Basic accuracy 40 Hz - 500 Hz: ±0.9% rdg. ±3 dgt. (True RMS, crest factor 3 or less)
Sẵn hàngLiên hệ
Chi tiết
Hioki 3157 AC GROUNDING HiTESTER

HIOKI

Hioki 3157 AC GROUNDING HiTESTER

Mã: 444544367477

  • Basic functions AC 4-terminal method resistance measurement Display Fluorescent tube (digital display) Current setting range 3.0 A to 31.0 A AC (0.1 A resolution), into 0.1Ω load Max. output power 130 VA (at output terminals) Open-terminal voltage Max. 6 V AC Generator frequency 50 Hz or 60 Hz sine wave (selectable) Resistance measurement 0 to 1.800 Ω (0.001 Ω resolution), Accuracy: ±2% rdg. ±4 dgt. after zero-adjust Voltage measurement 0 to 6.00 V AC (single range 0.01 V resolution), Accuracy: (1 % rdg. +5 dgt.) Monitor section 0 to 35.0 A AC/ 0 to 6 V AC, Refresh rate: 2 times/s Timer display Counts down time after start until preset time, Shows elapsed time after start Timer setting 0.5 s to 999 s Comparator PASS/FAIL evaluation using preset upper/lower limit, buzzer sound, signal output Memory function Max. 20 settings (with save/load) Interfaces EXT I/O, EXT SW, GP-IB or RS-232C (option) Power supply 100 to 120 V/200 to 240 V AC (switching, 50/60 Hz) Dimensions and mass 320 mm (12.60 in)W × 90 mm (3.54 in)H × 263 mm (10.35 in)D, 7 kg (246.9 oz) Accessories Power cord ×1, Instruction Manual ×1, Spare fuse (inlet) ×1, Shorting bar ×2
Sẵn hàngLiên hệ
Chi tiết
Ampe kìm HIOKI CM3289 AC CLAMP METER (1000 A, true RMS)

HIOKI

Ampe kìm HIOKI CM3289 AC CLAMP METER (1000 A, true RMS)

Mã: 149256282288

  • AC Current range 42.00 to 1000 A, 3 ranges (40 Hz to 1 kHz, True RMS), Basic accuracy: ±1.5 % rdg. ±5 dgt. DC Voltage range 420.0 mV to 600 V, 5 ranges, Basic accuracy: ±1.0 % rdg. ±3 dgt. AC Voltage range 4.200 V to 600 V, 4 ranges (45 to 500 Hz, True RMS), Basic accuracy: ±1.8 % rdg. ±7 dgt. Crest factor 2.5 or less at 2500 counts (Linearly decreases to 1.5 or less at 4200 count) Resistance range 420.0 Ω to 42.00 MΩ, 6 ranges, Basic accuracy: ±2 % rdg. ±4 dgt. Other functions Continuity: Buzzer sounds at 50 Ω ±40 Ω or less, Data hold, Auto power save, Drop-proof from height of 1 meter Display LCD, max. 4199 dgt., Display refresh rate: 400 ms Power supply Coin type lithium battery (CR2032) ×1 Continuous use 70 hours Core jaw dia. φ 33 mm (1.30 in)
Sẵn hàngLiên hệ
Chi tiết
RESISTANCE METER HIOKI RM3544

HIOKI

RESISTANCE METER HIOKI RM3544

Mã: 239316170534

  • Accuracy guaranteed: 1 year, Accuracy guarantee period after adjustment made by Hioki: 1 year Resistance range 30 mΩ (35.000 mΩ display max., 1 µΩ resolution) to 3 MΩ range (3.5000 MΩ display max., 100 Ω resolution), 9 steps Measurement accuracy: ±0.020 % rdg. ±0.007 % f.s. Testing current [at 30 mΩ range] 300 mA DC to [at 3 MΩ range] 500 nA DC Open-terminal voltage 5.5 V DC max. Temperature measurement -10.0 °Cto 99.9°C, accuracy: ±0.5 °C (Temperature Sensor Z2001 and RM3544 combined accuracy) Measurement speed FAST (50Hz: 21ms, 60Hz: 18ms) / MED (101ms) / SLOW (401ms) Display refresh rate N/A Functions Temperature correction, comparator (ABS/REF%), key-lock (OFF, menu lock, all lock), display digit count selection function (5 digits/ 4 digits), automatic power supply frequency settings (AUTO/50Hz/60Hz), scaling, judgment sound setting, auto hold, averaging, panel store/panel load Memory storage N/A Communication interfaces [Only RM3544-01] Select from RS-232C, Printer (RS-232C), or USB Remote function, communications monitor function, data output function Power supply 100 to 240 V AC, 50/60 Hz, Rated power consumption: 15 VA
Sẵn hàngLiên hệ
Chi tiết
RESISTANCE METER HIOKI RM3544-01

HIOKI

RESISTANCE METER HIOKI RM3544-01

Mã: 349858170479

  • Accuracy guaranteed: 1 year, Accuracy guarantee period after adjustment made by Hioki: 1 year Resistance range 30 mΩ (35.000 mΩ display max., 1 µΩ resolution) to 3 MΩ range (3.5000 MΩ display max., 100 Ω resolution), 9 steps Measurement accuracy: ±0.020 % rdg. ±0.007 % f.s. Testing current [at 30 mΩ range] 300 mA DC to [at 3 MΩ range] 500 nA DC Open-terminal voltage 5.5 V DC max. Temperature measurement -10.0 °Cto 99.9°C, accuracy: ±0.5 °C (Temperature Sensor Z2001 and RM3544 combined accuracy) Measurement speed FAST (50Hz: 21ms, 60Hz: 18ms) / MED (101ms) / SLOW (401ms) Display refresh rate N/A Functions Temperature correction, comparator (ABS/REF%), key-lock (OFF, menu lock, all lock), display digit count selection function (5 digits/ 4 digits), automatic power supply frequency settings (AUTO/50Hz/60Hz), scaling, judgment sound setting, auto hold, averaging, panel store/panel load Memory storage N/A Communication interfaces [Only RM3544-01] Select from RS-232C, Printer (RS-232C), or USB Remote function, communications monitor function, data output function Power supply 100 to 240 V AC, 50/60 Hz, Rated power consumption: 15 VA
Sẵn hàngLiên hệ
Chi tiết
Hioki CM3286-50 AC CLAMP POWER METER

HIOKI

Hioki CM3286-50 AC CLAMP POWER METER

Mã: 272823503487

  • Measurement line Single-phase, Three-phase (balanced with no distortion) Measurement items Voltage, Current, Voltage/Current peak, Active/Reactive/Apparent power, Power factor, Phase angle (*1), Frequency, Simple Active Energy Consumption (Single-phase) [With Z3210 installed (*2)] Voltage/Current harmonics AC voltage range [Measurement range] 80.0 V to 600.0 V, Single range, Basic accuracy 45-66 Hz: ±0.7% rdg. ±3 dgt. (Frequency characteristics: 45 to 1 kHz, True RMS) AC current range [Measurement range] 0.060 A to 600.0 A, 3 range, Basic accuracy 45-66 Hz: ±1.3% rdg. ±3 dgt. (Frequency characteristics: 45 to 1 kHz, True RMS) Power range [Single phase] 0.005 kW to 360.0 kW Basic accuracy: ±2.0% rdg. ±7 dgt. (50/ 60 Hz, Power factor=1) [Balanced three-phase 3-wire] 0.020 kW to 623.5 kW Basic accuracy: ±3.0% rdg. ±10 dgt. (50/ 60 Hz, Power factor=1) [Balanced three-phase 4-wire] 0.040 kW to 1080 kW Basic accuracy: ±2.0% rdg. ±3 dgt. (50/ 60 Hz, Power factor=1) Harmonic levels [With Z3210 installed (*2)] Voltage/Current harmonic levels up to 30th, Content factor, Total harmonic distortion ratio Other functions [Phase angle (*1)] lead -180.0° to lag 179.9°, [Power factor] -1.000 to 1.000 [Frequency] 45.0 Hz to 999.9 Hz, PEAK, Phase detection, MAX/MIN/AVG value display, Auto hold, electric meter comparison, unbalanced 3-phase power estimate display, etc. Dustproof and waterproof IP50 (for measurement of current in insulated conductors or storage in completely dry conditions) Power supply LR03 Alkaline battery ×2 Continuous use: approx. 25 hr (without Z3210 installed), approx. 18 hr. (with Z3210 installed and using wireless communications) Other conditions: 100 A AC measurement, backlight off, 23°C reference value Core jaw dia. φ 46 mm (1.81 in), Jaw dimensions: 92 mm (3.62 in) W x 18 mm (0.71 in) D mm
Sẵn hàngLiên hệ
Chi tiết
HIOKI BT3562A Battery HiTester (3mΩ~3kΩ, 6V~100V)

HIOKI

HIOKI BT3562A Battery HiTester (3mΩ~3kΩ, 6V~100V)

Mã: BT3562A

  • Dải đo điện trở: 3 mΩ (Hiển thị tối đa: 3.1000 mΩ, độ phân giải: 0.1 μΩ, dòng điện: 100 mA) 30 mΩ (Hiển thị tối đa: 31.000 mΩ, độ phân giải: 1 μΩ, dòng điện: 100 mA) 300 mΩ (Hiển thị tối đa: 310.00 mΩ, độ phân giải: 10 μΩ, dòng điện: 10 mA) 3 Ω (Hiển thị tối đa: 3.1000 Ω, độ phân giải: 100 μΩ, dòng điện: 1 mA) 30 Ω (Hiển thị tối đa: 31.000 Ω, độ phân giải: 1 mΩ, dòng điện: 100 μA) 300 Ω (Hiển thị tối đa: 310.00 Ω, độ phân giải: 10 mΩ, dòng điện: 10 μA) 3 kΩ (Hiển thị tối đa: 3.1000 kΩ, độ phân giải: 100 mΩ, dòng điện: 10 μA)
  • 3 mΩ (Hiển thị tối đa: 3.1000 mΩ, độ phân giải: 0.1 μΩ, dòng điện: 100 mA)
  • 30 mΩ (Hiển thị tối đa: 31.000 mΩ, độ phân giải: 1 μΩ, dòng điện: 100 mA)
Sẵn hàngLiên hệ
Chi tiết
HIOKI SM7110 SUPER MEGOHM METER

HIOKI

HIOKI SM7110 SUPER MEGOHM METER

Mã: 453677322907

  • Number of channels 1 ch DC current measurement 20 pA range (0.1 fA resolution), Accuracy: ±(2.0 % of rdg. +30 dgt.) 200 pA range (1.0 fA resolution), Accuracy: ±(1.0 % of rdg. +30 dgt.) 2 nA range (10 fA resolution), Accuracy: ±(0.5 % of rdg. +20 dgt.) 20 nA range (100 fA resolution), Accuracy: ±(0.5 % of rdg. +10 dgt.) 200 nA range (1 pA resolution), Accuracy: ±(0.5 % of rdg. +10 dgt.) 2 μA range (10 pA resolution), Accuracy: ±(0.5 % of rdg. +10 dgt.) 20 μA range (100 pA resolution), Accuracy: ±(0.5 % of rdg. +10 dgt.) 200 μA range (1 nA resolution), Accuracy: ±(0.5 % of rdg. +10 dgt.) *2 mA range (1 nA resolution), Accuracy: ±(0.5 % of rdg. +30 dgt.) (1) Measurement speed SLOW2 (internal integration time 13PLC) (2) At a temperature of 23 °C ±5 °C with humidity of 85% rh (3) 2 mA range (Measurement speed FAST only) Resistance measurement capabilities 1 × 10 ^3 Ω to 2 × 10 ^19 Ω Note: Resistance measurement accuracy is defined by the current range accuracy and voltage setting accuracy. Setting voltage range (Accuracy) 0.1 to 100.0 V, 100 mV resolution, Accuracy: ±0.1 % of setting ±0.05% f.s. 100.1 to 1000 V, 1 V resolution, Accuracy: ±0.1 % of setting ±0.05% f.s. Current Limiter 0.1 to 250.0 V: 5/ 10/ 50 mA, 251 to 1000 V: 5/ 10 mA, to 2000 V:1.8 mA Measurement time setting Delay: 0 to 9,999 ms Functions Comparator, averaging, self-calibration, jig Capacity open correction, cable length correction, surface resistivity, volume resistivity, voltage monitor, contact check Program function 10 types of discharge, charge, measure and measurement sequence discharge patterns can be programmed. Display LCD (8 lines of 30 characters), with backlight, High voltage warning indicator Interfaces USB, RS-232C, GP-IB, EXT I/O (NPN/PNP can be switched) Power supply 100 to 240V AC , 50/60 Hz, 45 VA
Sẵn hàngLiên hệ
Chi tiết
HIOKI SM7120 SUPER MEGOHM METER

HIOKI

HIOKI SM7120 SUPER MEGOHM METER

Mã: 453677322907-1

  • Number of channels 1 ch DC current measurement 20 pA range (0.1 fA resolution), Accuracy: ±(2.0 % of rdg. +30 dgt.) 200 pA range (1.0 fA resolution), Accuracy: ±(1.0 % of rdg. +30 dgt.) 2 nA range (10 fA resolution), Accuracy: ±(0.5 % of rdg. +20 dgt.) 20 nA range (100 fA resolution), Accuracy: ±(0.5 % of rdg. +10 dgt.) 200 nA range (1 pA resolution), Accuracy: ±(0.5 % of rdg. +10 dgt.) 2 μA range (10 pA resolution), Accuracy: ±(0.5 % of rdg. +10 dgt.) 20 μA range (100 pA resolution), Accuracy: ±(0.5 % of rdg. +10 dgt.) 200 μA range (1 nA resolution), Accuracy: ±(0.5 % of rdg. +10 dgt.) *2 mA range (1 nA resolution), Accuracy: ±(0.5 % of rdg. +30 dgt.) (1) Measurement speed SLOW2 (internal integration time 13PLC) (2) At a temperature of 23 °C ±5 °C with humidity of 85% rh (3) 2 mA range (Measurement speed FAST only) Resistance measurement capabilities 1×10 ^3 Ω to 2×10 ^19 Ω Note: Resistance measurement accuracy is defined by the current range accuracy and voltage setting accuracy. Setting voltage range (Accuracy) 0.1 to 100.0 V, 100 mV resolution, Accuracy: ±0.1 % of setting ±0.05% f.s. 100.1 to 1000 V, 1 V resolution, Accuracy: ±0.1 % of setting ±0.05% f.s. [SM7120 only] 1000 to 2000 V,1 V resolution, Accuracy: ±0.2 % of setting ±0.10% f.s. Current Limiter 0.1 to 250.0 V: 5/ 10/ 50 mA, 251 to 1000 V: 5/ 10 mA, to 2000 V:1.8 mA Measurement time setting Delay: 0 to 9,999 ms Functions Comparator, averaging, self-calibration, jig Capacity open correction, cable length correction, surface resistivity, volume resistivity, voltage monitor, contact check Program function 10 types of discharge, charge, measure and measurement sequence discharge patterns can be programmed. Display LCD (8 lines of 30 characters), with backlight, High voltage warning indicator Interfaces USB, RS-232C, GP-IB, EXT I/O (NPN/PNP can be switched) Power supply 100 to 240V AC , 50/60 Hz, 45 VA
Sẵn hàngLiên hệ
Chi tiết

Sản phẩm đo kiểm chính hãng cho doanh nghiệp

Chọn thiết bị theo ứng dụng, hãng sản xuất và yêu cầu kỹ thuật. Đội ngũ tư vấn hỗ trợ đối chiếu model, CO/CQ, hiệu chuẩn và thời gian giao hàng cho từng dự án.